|
품목
|
설명
|
 A. Composite
video and S-video input adapter cable Part #: CAB-DVI-VIN
|
| To use composite video and S-video input with certain Matrox
products. This adapter cable is installed between DVI connectors and allows the monitor signal to pass
through while providing extra connectors for video input. (Parhelia 256MB 참조.) |
|
 B. TV-output adapter cable (HD15 to
composite video and S-video) Part #: CAB-HD15-TVF
|
| Allows a composite video and/or an S-video output device (typically a
TV or video recorder) to connect to an HD-15 connector. Each output device (composite video or S-video)
receives the same video signal in different formats. |
|
 C. Millennium P650
TripleHead upgrade kit Part #: P65-UPGRADE-KIT
|
| Allows the Matrox Millennium P650 graphics card to be upgraded to support up
to 3 analog monitors at a time (using HD-15 connectors). This kit includes a software firmware upgrade. |
|
 D. Dual-TV-output adapter cable
for composite video and S-video Part #: LFH60VSV-E
|
| Allows certain Matrox products with LFH-60 connectors to support output
to 2 separate composite video and/or S-video devices (typically TVs or video recorders). |
|
 E. LFH60-to-DVI
dual-monitor cable (6-foot) Part #: DL-CAB-DVI
|
| To connect 2 digital (DVI) monitors at a time directly to certain
Matrox graphics cards. The more direct connection minimizes potential problems with bad third-party monitor
cables or adapters. |
|
 F. LFH60-to-DVI dual-monitor adapter
cable (1-foot) Part #: LFH60DDVI-E
|
| To connect 2 digital (DVI) monitors at a time to certain Matrox
graphics cards. |
|
 G. DIN8-to-composite-video
adapter cable Part #: CAB-DIN8-CVIN
|
| To allow composite video (RCA connector) input with the DIN-8
(S-video) connector of the Matrox Parhelia APVe
graphics card. |
|
|
NEW!
H. Quad-TV-output adapter cable for composite video and S-video
Part #: CAB-KX20-QTVF
|
| Allows certain Matrox products with KX-20 connectors to support output to 4 separate composite video and/or S-video devices. |
|
